The MTL attachments XC8T –

All NEW 2020 Xtreme Rotary AXE / Brush Cutter - The perfect tool for cutting ATV - UTV trails – Xtreme Heavy Brush, small stumps, saplings, hedgebush, overgrown areas.

Revolutionary “Hockey Puck style Blade system Quickest and easiest blade replacement of all cutters available on the market ! The absolute Largest Spindle Bearing carrier available, a Tapered MASSIVE 5” Bearing assyl / Output shaft. You will need to find a cutter over $10,000 to find anyone using this size spindle system- no one using this size output shaft has their cutters priced under $10K.

NEW for 2021 DIRECT DRIVE-POWERFUL HIGH TORQUE DRIVE MOTOR
Available in 100cc, 160cc, 200cc, 250cc offering flow ranges from 16 to 45 GPM
        ******************Also NOW Available**********************
NEW for 2021 DIRECT DRIVE-Continuous Flow PISTON DRIVE MOTORS

SAI - FS30 Motors - Industrial sized almost twice the size of the motors used by other Manufacturers
Available in flow ranges from 16 to 45 GPM, we offer Piston drive models with or without the case drain line now (We integrated the case drain into the forged pressure Block System on some models, preventing the need for a case drain line on your machine to be capable of running the Piston Powered units)

 Now available in 60” cut -68” Wide 72” cut- 78” wide & 78” cut- 84” wide
Largest in Industry – Huge Double round Flywheel (1/2” Steel Plates)
4-Blade ¾ High Carbon Steel with NEW for 2021 Mutiple rows of CARBIDE Tipped Teeth used for MULCHING & ground engaging - ( this means they will take out small stumps, and engage the ground to clear ATV-UTV-Walkways etc)
industry leading 8+" Diameter cutting capability for your Skid Steer

WE SELL UNITS THAT DO NOT REQUIRE A CASE DRAIN LINE TO OPERATE - you only need  2 hookups on your auxiliary hydraulics to run this unit - The new Piston Powered Models may require a case drain, we will verify every option to make sure you have the right cutter before shipping.

If your looking for a cutter that is as wide as your tracks are , please make sure you check our measurements                                                                           

The MTL Attachments XC8T is an unbelievable land clearing machine.

Use the MTL Attachments XC8T to clear property line, gas lines, and building lots.

The MTL-XC8T is capable of cutting up to 8+" diameter trees.

The MTL-XC8T Cutter features a TRUE DIRECT DRIVE motor system, which means there are no belts, chains with gears to break.

Solid steel deck plate with Custom extra heavy duty push bar and open face front.

NEW FOR 2020 Doubled (upper & Lower ) Doubled plate steel with 3/4" blade sandwiched between the solid steel Flywheel design with integrated balancing

NEW FOR 2020 AR400 solid Steel Blades 3/4" X 6" wide double edged blades / Extreme duty AXE style cutting blades – 5160 Blades Forged and treated will be available Mid 2020

****NEW FOR 2020 - Industry leading 48 different Motor, Flow, Power combinations to assure you are getting the best possible power for your machine
(we list the basics on the site, before shipping we go over every option and possibility, do not be afraid to order a cutter, we will  make sure you’re getting the correct options before we ship the unit)

Available in Flow rates from 16 GPM to 45 GPM

NEW FOR 2020 - Replaceable CARBIDE TEETH for MULCHING and small stump grinding that are attached to custom flywheel. (these teeth may be removed at anytime in a small amount of time to enhance the grass cutting ability and alleviate the mulching capability)

Custom welded FLANGE with HUGE doubled carrier drive unit - withstands almost any conditions

Bi-Directional operation - the MTL XC8T cuts in both forward and backward our forged Pressure Valve Block option gives you the ability to reverse from inside the cab, if specially ordered The manual valves will require a few moments to reverse the direction (reversible)

The XC8T has the blades just above where the Carbide “Green Teeth” would engage, when at ground level the Carbide tipped teeth will leave a clean almost Flush cut at ground level for your ATV-UTV trails.

62,000 lb impact rated bearing carrier - supports the most severe conditions imaginable

Universal quick connect system - fitting 99% of all skid steers produced.

Compare to the Bradco Ground Shark@ $12,000 - Blue Diamond Industrial @ over $11,000
Look also at the Rotary Axe 7000 or DIGGA Rotary Axe at $15k Plus

Units are Normally in stock and ready to ship (we sell on avg 150 cutters per month so there is a constant supply of stock) Time to ship out will vary - click on our shipping tab for current info. During season each year we do get backed up occasionally, we will try in to inform each order of the approximate ship date. 100% Powder coated assembly

please call 404-433-5364 for additional details or custom ordering options. 
60 cut / 68" width = approx 1610lbs
72 cut / 80" width = approx 1830lbs
78 cut / 84" width = approx 2000lbs

1 year limited warranty on drive system & any manufacturer Defects

We have available Brand NEW 60" & 72" and now our 78" model MTL Direct Drive units in both Triple Gloss Black & Kubota / Bobcat Orange - 
( please make sure to let us know in the check out section if you would like Orange, default is Black on the cutters)
100% Powder coated assembly - no painted junk
please call 404-433-5364 for additional details or custom ordering options.

Proudly made in the USA
1 year limited warranty on drive system & any manufacturer Defects 

**************** Shipping Cost is FREE to the lower 48 States to a Commercial Address or YRC terminal******************SHIPPING:* To ship at the stated price we will need a commercial building with forklift or loading bay (not a home based business address)
* $FREE also includes to your Local YRC freight terminal - you can check your closest terminal at YRC.com* Must be a direct service with YRC freight (CA, WA, OR, MT, WY, UT, ID may be subject to additional charges) There are a very few zip codes we can not ship to, if this ever occurs we will contact you and give you alternate options for delivery.
* Please make sure to provide your business name, address, and phone number. These are shipped via commercial freight carrier YRC Freight, XPO or other.
* Residential Delivery is available with an additional charge only $40 here on our site ( This fee includes a delivery appointment, delivery window, and the ability to work around delivery schedules easier than commercial delivery) It does not include a lift gate, our cutters do not fit on and are too heavy for the liftgate service, you machine must be present to offload or terminal pick up they will load you with a forklift for no charge.
* Will ship from Our warehouse in Waco, GA 30182 
RETURNS
**Return's Must be as New with All Freight Cost the responsibility of the Buyer

Please call or message me if you have any questions or would like to come inspect one of the units

***Common Questions***

Does the unit come with the couplers needed to plug into my machine ? -
Yes the unit is ready to go when it arrives - you will need nothing to start operating the unit. We try to make sure that we cover every option for a perfect delivery of your new MTL cutter.

Does the unit really take down 8" diameter trees? -
Yes, we rate it at 8” , we have a numerous amount of customers asking us to rename it the XC-10. I’m sure you can imagine why, we feel very comfortable rating it at 8” and have no plans of calling it a 10” diameter cutter – even if it is capable of this.

What is the advantage of the doubled flywheel carrier ? 
If you look on the market you will find there are some similar models offered, and most all of them are single plate carriers, during our testing and development we found the single carriers while cutting overgrowth, and grass work great, but on larger diameter material, they have a greater chance of bending, the double stack flywheel - increases the strength of the design by nearly 3X that of the single stack.